Introduction to Pessoa Competente em Proteção contra Quedas
Este treinamento de Conscientização sobre Segurança desenvolve o conhecimento e as habilidades práticas necessárias para atuar como uma pessoa competente em proteção contra quedas: identificar riscos de queda, aplicar a hierarquia de proteção contra quedas, selecionar e supervisionar ancoragens e conectores, calcular a distância de queda, inspecionar equipamentos de proteção contra quedas e planejar respostas de emergência e resgate. Quedas de altura continuam sendo uma das principais causas de acidentes fatais no trabalho, e a supervisão e inspeção competentes são essenciais para preveni-las. Este é um curso de conscientização não regulamentar e não substitui o treinamento obrigatório regulamentar.
Essential information
01
Prerequisites
Participants should hold a valid basic Work at Height training (e.g. NR-35) and be medically fit to perform work at height. Previous practical experience with fall protection equipment is recommended.
02
Who is it for?
This training is designed for supervisors, safety technicians, HSE professionals, team leaders and experienced workers at height who are responsible for planning, supervising and inspecting work at height activities and fall protection systems. It is intended for personnel working in construction, industrial maintenance, offshore/onshore oil and gas facilities, shipyards and other sectors where there is a risk of falling from height, and who need to identify existing and foreseeable fall hazards, take corrective action, and inspect fall protection equipment.
03
Assessment
Theoretical test at the end of Day 3 with 10 questions (5 multiple-choice questions with 5 options and only one correct answer, and 5 true-or-false questions), in the language of delivery (Portuguese or English); pass mark 70%. Practical performance assessment during the Module 7 exercises, recorded on the Practical Performance Assessment Form (Approved / Not Approved).
04
Certification
Upon successful completion you will receive a Maersk Training certificate
Course content
Regulatory Framework and Roles
Applicable references, duties of the competent person and distinctions between authorized, competent and qualified persons.
Risk Management
Hazard identification, hierarchy of fall protection, risk analysis, work permits and safe access methods.
Anchorages and Connectors
Anchorage systems, lifelines, lanyards, slings, connectors, snap hooks, carabiners and compatibility requirements.
Fall Clearance
Fall factor, impact force reduction, swing fall and calculation of required clearance for fall arrest systems.
Equipment Inspection
Inspection of harnesses, lanyards, anchorage connectors, self-retracting devices, vertical lifelines and rope grabs.
Emergency and Rescue
Rescue planning, suspension trauma, rescue priorities, escape techniques and pre-engineered rescue systems.
Practical Activities
Assembly, use and inspection of fall protection systems, mechanical advantage systems, rescue, escape, equipment care and maintenance.
Key Learning Objectives
LO1 - Identify the regulatory and technical requirements for work at height and distinguish the roles of authorized, competent and qualified persons.
LO2 - Analyse work-at-height risks and apply the hierarchy of fall protection, risk assessment, work permits and safe access methods.
LO3 - Select appropriate anchorages, lifelines and connectors and ensure compatibility within the fall protection system.
LO4 - Calculate required fall clearance, considering fall factor, impact reduction and swing fall.
LO5 - Plan emergency and rescue arrangements for work at height, including rescue priorities and prevention of suspension trauma.
LO6 - Inspect, use and maintain fall protection equipment and demonstrate rescue and escape techniques using appropriate systems.
Cursos Sugeridos
Pessoa Competente em Proteção contra Quedas
Localização:
Idioma:
EN | PO
EN | PO
Pessoa Competente em Proteção contra Quedas
Localização:
Idioma: EN | PO